Rydeen | BSS3 — Microwave Radar Blind Spot Detection System

Details

The Radar Blind Spot System is based on microwave radar technology for extended distance and sensitivity. Our BSS2 kit adds an extra set of eyes and warns the driver if there are any vehicles approaching in either blind spot before and during a lane change maneuver. Our system uses GPS to initiate operation above 20 MPH eliminating potential fault alerts. Unlike other systems, it requires no drilling into the bumpers. Radar Sensors install behind the bumpers hidden with included metal bracket hardware and alert the driver with two compact LED Indicators mounted on the “A” Pillars and a small hideaway adjustable speaker. This Microwave system is more accurate than previous ultrasonic based sensor solutions from other companies.

Kit also includes newly revised “Cross Traffic Detection Alert” for backing/reversing out of a tight space when visibility is limited while vehicles coming down isle.

Specifications

Sensor Operating Frequency
24GHz
Transmit Powery
15dbm
Detection Ability
5 targets can be detected at the same time
Detection Speed Range
0.5mph—137mph
Speed Accuracy
< 0.5mph
Speed Restriction
1. There are 4 speed restriction options; 5 mph, 10 mph, 15 mph, 20 mph. Default is 20 mph.
2. If no GPS signal is detected or satellites not found, the system will be active at any speed.
Direction of Movement
Approached or overtaken by vehicles
Operating Voltage
9—18V
Waterproof (Radar Sensor)
Radars: IP67 / Cables: NOT waterproof
Working Current
< 200mA
Working Temperature
-20°C — +70°C
Installation Angle
20°(Horizontal)
Gain
12k